mparams@mitindia.edu 044 2251 6179

Latest Journals (Scopus indexed)

  1. I. Elango, L.C. Henderson and V. Arumugam, Recycled milled fibres in sustainable composite materials: A comprehensive review and future prospects, Journal of Reinforced Plastics and Composites, 2024 Recycled milled fibres in sustainable composite materials: A comprehensive review and future prospects .
  2. J. Gnanasekaran and B.T.N. Sridhar, Investigation on compression ramp with surface V-groove for scramjet combustor, Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2024 Investigation on compression ramp with surface V-groove for scramjet combustor (9) .
  3. K. Veena, K.M. Parammasivam and T.N. Venkatesh, The effect of building layout patterns on the formation of heat islands: a computational study, Progress in Computational Fluid Dynamics, 2024 The effect of building layout patterns on the formation of heat islands: a computational study (3) : pp143-161 .
  4. M. Saleem, B.S.H. Khan and V. Arumugam, Damage and failure assessment of banana/ramie/epoxy composites using acoustic emission monitoring, Construction and Building Materials, 2024 Damage and failure assessment of banana/ramie/epoxy composites using acoustic emission monitoring .
  5. N. Ramasamy, V. Arumugam, S. Sambath, T. Arunkumar and M. Prakash, Influence of fiber surface treatments and hybridization on interply and intraply Kevlar reinforced polymer composites, Journal of Reinforced Plastics and Composites, 2024 Influence of fiber surface treatments and hybridization on interply and intraply Kevlar reinforced polymer composites .
  6. S. Balraj and A. Ganesan, Analysis of Unpowered Freewheeling Propeller Impact in Quadcopter for Energy Harvesting Process, Defence Science Journal, 2024 Analysis of Unpowered Freewheeling Propeller Impact in Quadcopter for Energy Harvesting Process (1) : pp3-10 .
  7. T.V.S. Manikanta and B.T.N. Sridhar, Effect of wall length on an interacting supersonic rectangular jet, Aircraft Engineering and Aerospace Technology, 2024 Effect of wall length on an interacting supersonic rectangular jet (5) : pp736-746 .
  8. T.V.S. Manikanta and B.T.N. Sridhar, An experimental study on the interaction effects between a rectangular supersonic jet and a flat wall at different wall lengths, Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2024 An experimental study on the interaction effects between a rectangular supersonic jet and a flat wall at different wall lengths (5) .
  9. V. Dinesh Babu, V. Arumugam and C. Santulli, Damage monitoring of glass/epoxy-curved laminates with different stacking sequences using acoustic emission, Structural Health Monitoring, 2024 Damage monitoring of glass/epoxy-curved laminates with different stacking sequences using acoustic emission .
  10. A.U. Bharathi, V. Arumugam and C.S. Kumar, Experimental Investigation on the Effect of Stacking Sequence on Damage Resistance and Post-indentation Performance of Glass/Epoxy Laminates under Different Loading Planes Using Acoustic Emission Monitoring, Materials Research, 2023 Experimental Investigation on the Effect of Stacking Sequence on Damage Resistance and Post-indentation Performance of Glass/Epoxy Laminates under Different Loading Planes Using Acoustic Emission Monitoring .
  11. G. Sivaraj, K.M. Parammasivam, M.S. Prasath and D. Lakshmanan, Numerical Simulation of Hatchback Car with Modified Vehicle Design for the Improvement of Fuel Consumption, Journal of Applied Fluid Mechanics, 2023 Numerical Simulation of Hatchback Car with Modified Vehicle Design for the Improvement of Fuel Consumption (9) : pp1806-1817 .
  12. H. Soundararajan and S. B.T.N, Numerical study on strut insertion based thrust vectoring control system, Aircraft Engineering and Aerospace Technology, 2023 Numerical study on strut insertion based thrust vectoring control system (2) : pp201-213 .
  13. K. Saravanakumar, C.S. Kumar and V. Arumugam, Effect of elevated temperature on indentation response of glass/epoxy laminates hybridised with milled fibres, International Journal of Materials Engineering Innovation, 2023 Effect of elevated temperature on indentation response of glass/epoxy laminates hybridised with milled fibres (1) : pp34-48 .
  14. M. Saleem, K. Orra and V. Arumugam, Structural health monitoring of natural fiber-based hybrid composites, Polymer Composites, 2023 Structural health monitoring of natural fiber-based hybrid composites (9) : pp5867-5878 .
  15. M. Vijayakumar, K.M. Parammasivam, S. Rajagopal and C. Balaji, Effect of Localised Pressure Depression and Rain on Aerodynamic Characteristics of MALE UAV, Defence Science Journal, 2023 Effect of Localised Pressure Depression and Rain on Aerodynamic Characteristics of MALE UAV (4) : pp385-393 .
  16. P.K. Mohanta, B.T.N. Sridhar and R.K. Mishra, Influence of nozzle exit geometrical parameters on supersonic jet decay, International Journal of Turbo and Jet Engines, 2023 Influence of nozzle exit geometrical parameters on supersonic jet decay (2) : pp215-222 .
  17. S. Elanchezhian and G. Anitha, Software In-Loop Simulation of a Quad Tilt Rotor Unmanned Aerial Vehicle for Transition Control, Transactions of Famena, 2023 Software In-Loop Simulation of a Quad Tilt Rotor Unmanned Aerial Vehicle for Transition Control (1) : pp21-36 .
  18. S. Elanchezhian and G. Anitha, Software In-Loop Simulation of a Quad Tilt Rotor Unmanned Aerial Vehicle for Transition Control, Transactions of Famena, 2023 Software In-Loop Simulation of a Quad Tilt Rotor Unmanned Aerial Vehicle for Transition Control (1) : pp21-36 .
  19. S. Kumar Nagothu, G. Anitha, B. Siranthini, V. Anandi and P. Siva Prasad, Weed detection in agriculture crop using unmanned aerial vehicle and machine learning, Materials Today: Proceedings, 2023 Weed detection in agriculture crop using unmanned aerial vehicle and machine learning .
  20. S. Surya Narayanan and P. K.M, A review of computational studies on trapped vortex combustors for gas turbine applications, Aircraft Engineering and Aerospace Technology, 2023 A review of computational studies on trapped vortex combustors for gas turbine applications (4) : pp658-667 .
  21. S.B.J. Richards, S. Thanigaiarasu and M. Kaushik, Experimental Study on the Effect of Tabs with Asymmetric Projections on the Mixing Characteristics of Subsonic Jets, Journal of Applied Fluid Mechanics, 2023 Experimental Study on the Effect of Tabs with Asymmetric Projections on the Mixing Characteristics of Subsonic Jets (6) : pp1208-1217 .
  22. S.K. Nagothu and G. Anitha, Fuzzy based Irrigation Control System for Indian Subcontinent, Journal of Scientific and Industrial Research, 2023 Fuzzy based Irrigation Control System for Indian Subcontinent (3) : pp355-362 .
  23. V. Dinesh Babu, V. Arumugam and C. Santulli, Experimental investigation of the enhancement of delamination resistance in glass/epoxy curved laminates, Journal of Materials Science, 2023 Experimental investigation of the enhancement of delamination resistance in glass/epoxy curved laminates (37) : pp14723-14739 .
  24. A. Kaviyarasu, A. Saravanakumar and G. Rajesh, HILS-based Waypoint Simulation for Fixed Wing Unmanned Aerial Vehicle (UAV), Defence Science Journal, 2022 HILS-based Waypoint Simulation for Fixed Wing Unmanned Aerial Vehicle (UAV) (5) : pp687-694 .
  25. A.L. Srinivas and B.T.N. Sridhar, Experimental Study of Strut Insertion Technique in a Convergent-Divergent Nozzle for Thrust Vector Control, Instruments and Experimental Techniques, 2022 Experimental Study of Strut Insertion Technique in a Convergent-Divergent Nozzle for Thrust Vector Control (1) : pp132-141 .
  26. B. Navin Kumar, K.M. Parammasivam, P.N. Selvaraju and R. Anbalagan, Feasibility analysis of novel aerodynamic braking system for horizontal axis wind turbines, Materials Today: Proceedings, 2022 Feasibility analysis of novel aerodynamic braking system for horizontal axis wind turbines : pp1396-1402 .
  27. D.R.B.B. Rose and B.T.N. Sridhar, A rectangular strut on the expansion ramp of a scramjet thruster for thrust vector control, Acta Astronautica, 2022 A rectangular strut on the expansion ramp of a scramjet thruster for thrust vector control : pp9-21 .
  28. K. Saravanakumar, N. Farouk, C. Suresh Kumar and V. Arumugam, Influence of milled glass fillers on mode-II fracture toughness of polymer composites, Materials Science and Technology (United Kingdom), 2022 Influence of milled glass fillers on mode-II fracture toughness of polymer composites (5) : pp308-317 .
  29. N. Ramasamy, V. Arumugam and C. Suresh Kumar, Effect of fiber surface modifications on the interfacial adhesion in kevlar fiber reinforced polymer composites, Journal of Adhesion Science and Technology, 2022 Effect of fiber surface modifications on the interfacial adhesion in kevlar fiber reinforced polymer composites (1) : pp54-74 .
  30. N. Ramasamy, V. Arumugam and C. Suresh Kumar, Characterization of fiber/matrix interfacial bonding strength of chemically grafted aramid fiber surface with epoxy resin composites, Polymer Composites, 2022 Characterization of fiber/matrix interfacial bonding strength of chemically grafted aramid fiber surface with epoxy resin composites (1) : pp399-410 .
  31. S. Ilakkiya and B.T.N. Sridhar, Study of decay, spread, and shock structure of a supersonic jet issuing from a C-D nozzle with semi-circular grooves, Thermophysics and Aeromechanics, 2022 Study of decay, spread, and shock structure of a supersonic jet issuing from a C-D nozzle with semi-circular grooves (3) : pp327-346 .
  32. S. Ilakkiya and B.T.N. Sridhar, Study of decay, spread, and shock structure of a supersonic jet issuing from a C-D nozzle with semi-circular grooves, Thermophysics and Aeromechanics, 2022 Study of decay, spread, and shock structure of a supersonic jet issuing from a C-D nozzle with semi-circular grooves (3) : pp327-346 .
  33. V.G. Krishna Anand and K.M. Parammasivam, Investigations of Trenched Film Hole Orientation Angle on Film Cooling Effectiveness, International Journal of Turbo and Jet Engines, 2022 Investigations of Trenched Film Hole Orientation Angle on Film Cooling Effectiveness (2) : pp125-134 .
  34. A. Jayababu, V. Arumugam, B. Rajesh and C.S. Kumar, Damage Characterization in Glass/Epoxy Composite Laminates under Normal and Oblique Planes of Cyclic Indentation Loading with AE Monitoring, Materials Evaluation, 2021 Damage Characterization in Glass/Epoxy Composite Laminates under Normal and Oblique Planes of Cyclic Indentation Loading with AE Monitoring (1) : pp61-77 .
  35. A. Kaviyarasu, A. Saravanakumar and M. Logavenkatesh, Software in loop simulation based waypoint navigation for fixed wing uav, Defence Science Journal, 2021 Software in loop simulation based waypoint navigation for fixed wing uav (4) : pp448-455 .
  36. A. Lakshmi Srinivas and B.T.N. Sridhar, Experimental study of internal forces and moments generated by strut injection in a supersonic cross-flow in a C-D nozzle, Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2021 Experimental study of internal forces and moments generated by strut injection in a supersonic cross-flow in a C-D nozzle (2) .
  37. A. Saravanakumar, A. Kaviyarasu and R. Ashly Jasmine, Sampling based path planning algorithm for UAV collision avoidance, Sadhana - Academy Proceedings in Engineering Sciences, 2021 Sampling based path planning algorithm for UAV collision avoidance (3) .
  38. D.R.B.B. Rose and B.T.N. Sridhar, An experimental investigation on the use of a rectangular strut in a scramjet thruster for thrust vector control, Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 2021 An experimental investigation on the use of a rectangular strut in a scramjet thruster for thrust vector control (11) : pp1374-1384 .
  39. K. Saravanakumar, C. Suresh Kumar and V. Arumugam, Damage monitoring of glass/epoxy laminates with different interply fiber orientation using acoustic emission, Structural Health Monitoring, 2021 Damage monitoring of glass/epoxy laminates with different interply fiber orientation using acoustic emission (2) : pp445-455 .
  40. K. Shruthi, K. Saravanakumar, V. Arumugam and C. Suresh Kumar, Effect of patch hybridisation on indentation resistance and residual performance of patch repaired glass/epoxy laminates using acoustic emission monitoring, Nondestructive Testing and Evaluation, 2021 Effect of patch hybridisation on indentation resistance and residual performance of patch repaired glass/epoxy laminates using acoustic emission monitoring (5) : pp528-545 .
  41. K.A. Vasu Devan Nair Girija Kumari and P. Kanjikoil Mahali, Investigations of improved cooling effectiveness for ramp film cooling with compound angle film cooling jets, Aircraft Engineering and Aerospace Technology, 2021 Investigations of improved cooling effectiveness for ramp film cooling with compound angle film cooling jets (6) : pp971-984 .
  42. M. Udhayakumar, P. Saravanan and K.M. Parammasivam, Experimental study of a winglet added small wind turbine with a flanged diffuser for domestic applications, International Journal of Ambient Energy, 2021 Experimental study of a winglet added small wind turbine with a flanged diffuser for domestic applications .
  43. P. Narendra Ilaya Pallavan, S. Srinivasan and V. Arumugam, Estimation of Thermo Oxidation on Chromel–Alumel Thermocouple, Springer Proceedings in Materials, 2021 Estimation of Thermo Oxidation on Chromel–Alumel Thermocouple : pp897-902 .
  44. P.K. Mohanta, B.T.N. Sridhar and R.K. Mishra, Influence of nozzle exit geometrical parameters on supersonic jet decay, International Journal of Turbo and Jet Engines, 2021 Influence of nozzle exit geometrical parameters on supersonic jet decay .
  45. S. Anumula and A. Ganesan, Wireless power charging of drone using vision-based navigation, Journal of Navigation, 2021 Wireless power charging of drone using vision-based navigation (4) : pp838-852 .
  46. S. Bogadi and B.T.N. Sridhar, Acoustic characteristics of supersonic rectangular jets issuing from nozzles with diagonal expansion ramps, Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2021 Acoustic characteristics of supersonic rectangular jets issuing from nozzles with diagonal expansion ramps (12) .
  47. S. Gopinath, M. Sundararaj, S. Elangovan and B.T.N. Sridhar, Effect of Swirling Secondary Flow on the Under-expanded Non-circular Supersonic Jets S. Gopinath et al.: Effect of Swirling Secondary Flow S. Gopinath et al.: Effect of Swirling Secondary Flow, International Journal of Turbo and Jet Engines, 2021 Effect of Swirling Secondary Flow on the Under-expanded Non-circular Supersonic Jets S. Gopinath et al.: Effect of Swirling Secondary Flow S. Gopinath et al.: Effect of Swirling Secondary Flow (1) : pp41-49 .
  48. S. Kannivel, A. Vellayaraj, I. Kolimi and J. Thomas, Effect of thickness on indentation response and tensile loading behaviour of glass/epoxy laminates under acoustic emission monitoring, Nondestructive Testing and Evaluation, 2021 Effect of thickness on indentation response and tensile loading behaviour of glass/epoxy laminates under acoustic emission monitoring (2) : pp158-175 .
  49. S. Senthil Kumar and G. Anitha, A Novel Self-Tuning Fuzzy Logic-Based PID Controllers for Two-Axis Gimbal Stabilization in a Missile Seeker, International Journal of Aerospace Engineering, 2021 A Novel Self-Tuning Fuzzy Logic-Based PID Controllers for Two-Axis Gimbal Stabilization in a Missile Seeker .
  50. S. Senthil Kumar and G. Anitha, Fuzzy Logic-Based Self-Tuning PID Controllers Using Parameters Adaptive Method for Stabilization of a Two-Axis Seeker Gimbal, IETE Journal of Research, 2021 Fuzzy Logic-Based Self-Tuning PID Controllers Using Parameters Adaptive Method for Stabilization of a Two-Axis Seeker Gimbal .
  51. V.G. Krishna Anand and K.M. Parammasivam, Optimization of Trenched Film Cooling Using RSM Coupled CFD, International Journal of Turbo and Jet Engines, 2021 Optimization of Trenched Film Cooling Using RSM Coupled CFD (4) : pp363-375 .
  52. V.G. Krishna Anand and K.M. Parammasivam, Thermal barrier coated surface modifications for gas turbine film cooling: a review, Journal of Thermal Analysis and Calorimetry, 2021 Thermal barrier coated surface modifications for gas turbine film cooling: a review (2) : pp545-580 .