kannamalai@annauniv.edu 044 2251 6072

Latest Journals (Scopus indexed)

  1. G. Sundarapandian and K. Arunachalam, IMPROVEMENT in the RECAST LAYER THICKNESS, CORNER RADIUS and SURFACE ROUGHNESS of MONEL K 400 THROUGH CFRP, NANO-SiC, and ZrSiO4 PARTICLES ADDED WIRE EDM, Surface Review and Letters, 2024 IMPROVEMENT in the RECAST LAYER THICKNESS, CORNER RADIUS and SURFACE ROUGHNESS of MONEL K 400 THROUGH CFRP, NANO-SiC, and ZrSiO4 PARTICLES ADDED WIRE EDM .
  2. J. Padmanaban, D. Kandaswamy, P.J.T. Joshua and A. Natarajan, Statistical analysis of engine fueled with two identical lower aromatic biofuel blends at various injection pressure, Energy Sources, Part A: Recovery, Utilization and Environmental Effects, 2024 Statistical analysis of engine fueled with two identical lower aromatic biofuel blends at various injection pressure (1) : pp7720-7735 .
  3. M.S. Kumar, M. Muniyappan and S.A. Selvan, Experimental and CFD analysis on the impact of hydrogen as fuel on the behavior of a passenger car gasoline direct injection engine, Journal of the Energy Institute, 2024 Experimental and CFD analysis on the impact of hydrogen as fuel on the behavior of a passenger car gasoline direct injection engine .
  4. S. Sunil and K. Arunachalam, Improving the energy efficiency and carbon dioxide reduction of a long-haul bus through aerodynamic design optimization, Global Nest Journal, 2024 Improving the energy efficiency and carbon dioxide reduction of a long-haul bus through aerodynamic design optimization (5) .
  5. A. Arivazhagan, K. Arunachalam, R. Varalakshmi and B. Vasanthan, H∞ Static Output-Feedback Control with Variable Substitution Scheme for Non-Stationary Running Active Suspension Vehicle, International Journal of Vehicle Structures and Systems, 2023 H∞ Static Output-Feedback Control with Variable Substitution Scheme for Non-Stationary Running Active Suspension Vehicle (6) : pp762-768 .
  6. A. Chakraborty and K. Arunachalam, Test methodology for validating tractor structural part under multiaxial loading, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 2023 Test methodology for validating tractor structural part under multiaxial loading .
  7. A. Sangeet Sahaya Jeyangel, R.D. Babu, S. Akilan, K. Mohanraj, N.S.H. Vignesh and M. Muazz, Experimental Analysis of Performance, Combustion and Emission Characteristics of Single Cylinder Diesel Engine using Diesel-Turpentine Blend, International Journal of Vehicle Structures and Systems, 2023 Experimental Analysis of Performance, Combustion and Emission Characteristics of Single Cylinder Diesel Engine using Diesel-Turpentine Blend (5) : pp649-654 .
  8. B. Vasanthan, S.A. Prasad, V.S. Benito, M.K. Dhanusubashini, R. Gokulkannan and S.S. Thiruveedhi, Design and Development of e-Shared Mobility (Micromobility) for First and Last-Mile Connectivity, International Journal of Vehicle Structures and Systems, 2023 Design and Development of e-Shared Mobility (Micromobility) for First and Last-Mile Connectivity (5) : pp645-648 .
  9. G. Anandkumar, K.S. Muthukarupan, S. Premnath, P.N. Selvaraju and G. Amshumaan, Investigation on the Performance of Hydrogen Induction in a CRDI Engine: A Review, International Journal of Vehicle Structures and Systems, 2023 Investigation on the Performance of Hydrogen Induction in a CRDI Engine: A Review (5) : pp692-698 .
  10. G. Anandkumar, V. Sasikala, B.P.C. Rao, S. Raghunandhan, B.Y. Kumar and R.S. Ranjani, Effect of CNG Induction on the Performance and Emission Characteristics of a DI Diesel Engine Fuelled with Biodiesel Ethanol Blends, International Journal of Vehicle Structures and Systems, 2023 Effect of CNG Induction on the Performance and Emission Characteristics of a DI Diesel Engine Fuelled with Biodiesel Ethanol Blends (5) : pp680-683 .
  11. G. SundaraPandian and K. Arunachalam, Experimental studies on thermal and FTIR characterisation of bio-degradable neat neem gum and epoxy resin for composite material applications, Natural Product Research, 2023 Experimental studies on thermal and FTIR characterisation of bio-degradable neat neem gum and epoxy resin for composite material applications .
  12. N. Arivarasan, K. Annamalai, G.A. Kumar, S. Sunil, S. Ramakrishnan and A.S.S. Jeyangel, Enhanced Performance and Emission Reduction in CI Engine using Octanol/Diesel Blend, International Journal of Vehicle Structures and Systems, 2023 Enhanced Performance and Emission Reduction in CI Engine using Octanol/Diesel Blend (6) : pp748-756 .
  13. N. Arivarasan, K. Annamalai, G.A. Kumar, S. Sunil, S. Ramakrishnan and A.S.S. Jeyangel, Enhanced Performance and Emission Reduction in CI Engine using Octanol/Diesel Blend, International Journal of Vehicle Structures and Systems, 2023 Enhanced Performance and Emission Reduction in CI Engine using Octanol/Diesel Blend (6) : pp748-756 .
  14. P. Pathmanaban, S. Sunil, A.S.S. Jeyangel and S. Chermadurai, Tyre Defect Detection using Deep Learning Technique, International Journal of Vehicle Structures and Systems, 2023 Tyre Defect Detection using Deep Learning Technique (5) : pp699-703 .
  15. P. Pathmanaban, S. Sunil, A.S.S. Jeyangel and S. Chermadurai, Tyre Defect Detection using Deep Learning Technique, International Journal of Vehicle Structures and Systems, 2023 Tyre Defect Detection using Deep Learning Technique (5) : pp699-703 .
  16. S. Rajendran, P. Ganesan and G. Anandkumar, A comparative assessment on performance, combustion and emission characteristics of diesel engine fuelled by juliflora biodiesel-diesel blends, Australian Journal of Mechanical Engineering, 2023 A comparative assessment on performance, combustion and emission characteristics of diesel engine fuelled by juliflora biodiesel-diesel blends (1) : pp257-269 .
  17. S.A. Prasad, B. Vasanthan, J.K.A. Babu, V. Bharath, R.D. Chellam, R.G. Aditiyan and S. Karthi, Conversion of IC Engine Three-Wheeler to In-campus Electric Micro Mobility by Retrofitting, International Journal of Vehicle Structures and Systems, 2023 Conversion of IC Engine Three-Wheeler to In-campus Electric Micro Mobility by Retrofitting (5) : pp640-644 .
  18. S.J. Narasimharaju, K. Annamalai, G. Anandkumar and P. Jagan, Comparative Study of Electrical Conductive Coating Materials on Al Alloy-based Bipolar Plates in Proton Exchange Membrane Fuel Cells Applications, International Journal of Vehicle Structures and Systems, 2023 Comparative Study of Electrical Conductive Coating Materials on Al Alloy-based Bipolar Plates in Proton Exchange Membrane Fuel Cells Applications (5) : pp684-691 .
  19. A.P. Venkatesh, S. Padmanabhan, G.V. Rajveer, K. Yuvaja and M. Muniyappan, Effect of fuel injection pressure on the performance and emission analysis of Mahua Methyl ester in a single cylinder diesel engine, International Journal of Ambient Energy, 2022 Effect of fuel injection pressure on the performance and emission analysis of Mahua Methyl ester in a single cylinder diesel engine (1) : pp1556-1560 .
  20. B. Rajmohan and K. Arunachalam, MECHANICAL PROPERTIES OF BANANA/BAMBOO/COCONUT FIBRE BASED PHENOLIC HYBRID COMPOSITES MADE BY USING AUTOCLAVE MOULDING TECHNIQUE, Transactions of Famena, 2022 MECHANICAL PROPERTIES OF BANANA/BAMBOO/COCONUT FIBRE BASED PHENOLIC HYBRID COMPOSITES MADE BY USING AUTOCLAVE MOULDING TECHNIQUE (1) : pp103-114 .
  21. P. Raju and S. Masimalai, Numerical Study on a Diesel–Hydrogen Dual-Fuel Engine with Water Injection and Variable Compression Ratio, Energy Technology, 2022 Numerical Study on a Diesel–Hydrogen Dual-Fuel Engine with Water Injection and Variable Compression Ratio (7) .
  22. A. Anandan and A. Kandavel, Combined Input–Output Finite-time Stability with H∞ Static Output-feedback Control Approach for Active Suspension, IETE Journal of Research, 2021 Combined Input–Output Finite-time Stability with H∞ Static Output-feedback Control Approach for Active Suspension .
  23. A.P. Venkatesh, M. Muniyappan, C. Joel and S. Padmanabhan, Investigation on the effect of nanofluid on performance behaviour of a waste cooking oil on a small diesel engine, International Journal of Ambient Energy, 2021 Investigation on the effect of nanofluid on performance behaviour of a waste cooking oil on a small diesel engine (5) : pp540-545 .
  24. A.S. Soosairaj and A. Kandavel, Ride comfort analysis of driver seat using super twisting sliding mode controlled magnetorheological suspension system, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 2021 Ride comfort analysis of driver seat using super twisting sliding mode controlled magnetorheological suspension system (14) : pp3606-3618 .
  25. P. Purushothaman, S. Masimalai and V. Subramani, Effective utilization of mahua oil blended with optimum amount of Al2O3 and TiO2 nanoparticles for better performance in CI engine, Environmental Science and Pollution Research, 2021 Effective utilization of mahua oil blended with optimum amount of Al2O3 and TiO2 nanoparticles for better performance in CI engine (10) : pp11893-11903 .
  26. P. Raju, S.K. Masimalai and N. Ganesan, Extracting methyl-ester from waste cooking oil for fueling a light duty diesel engine–a dual fuel approach, Energy Sources, Part A: Recovery, Utilization and Environmental Effects, 2021 Extracting methyl-ester from waste cooking oil for fueling a light duty diesel engine–a dual fuel approach (12) : pp1429-1443 .
  27. R. Bose and A. Kandavel, Mechanical characterization and structural attributes of biohybrid composites derived using hemp, bamboo, and jute fibres: An alternative approach in the application of natural fibres in automobile parts, Strojniski Vestnik/Journal of Mechanical Engineering, 2021 Mechanical characterization and structural attributes of biohybrid composites derived using hemp, bamboo, and jute fibres: An alternative approach in the application of natural fibres in automobile parts (10) : pp534-544 .
  28. A. Anandan and A. Kandavel, Investigation and performance comparison of ride comfort on the created human vehicle road integrated model adopting genetic algorithm optimized proportional integral derivative control technique, Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics, 2020 Investigation and performance comparison of ride comfort on the created human vehicle road integrated model adopting genetic algorithm optimized proportional integral derivative control technique (2) : pp288-305 .
  29. K. Ramalingam, D. Balasubramanian, P.J.T.J.S. Chellakumar, J. Padmanaban, P. Murugesan and T. Xuan, An assessment on production and engine characterization of a novel environment-friendly fuel, Fuel, 2020 An assessment on production and engine characterization of a novel environment-friendly fuel .
  30. K. s. v and S.K. Masimalai, Predicting the performance and emission characteristics of a Mahua oil-hydrogen dual fuel engine using artificial neural networks, Energy Sources, Part A: Recovery, Utilization and Environmental Effects, 2020 Predicting the performance and emission characteristics of a Mahua oil-hydrogen dual fuel engine using artificial neural networks (23) : pp2891-2910 .
  31. N. Ganesan and S. Masimalai, Experimental investigation on a performance and emission characteristics of single cylinder diesel engine powered by waste orange peel oil biodiesel blended with antioxidant additive, Energy Sources, Part A: Recovery, Utilization and Environmental Effects, 2020 Experimental investigation on a performance and emission characteristics of single cylinder diesel engine powered by waste orange peel oil biodiesel blended with antioxidant additive (11) : pp1412-1423 .
  32. N. Ganesan, S. Masimalai, P. Ekambaram and K. Selvaraju, Experimental Assessment of Effects of n-Butanol on Performance, Emission, and Combustion Characteristics of Mahua Oil Fueled Reactivity Controlled Compression Ignition (RCCI) Engine, Emission Control Science and Technology, 2020 Experimental Assessment of Effects of n-Butanol on Performance, Emission, and Combustion Characteristics of Mahua Oil Fueled Reactivity Controlled Compression Ignition (RCCI) Engine (3) : pp345-357 .
  33. P. Raju, S.K. Masimalai, N. Ganesan and S.V. Karthic, Engine's behavior on hydrogen addition of waste cooking oil fueled light duty diesel engine - A dual fuel approach, Energy, 2020 Engine's behavior on hydrogen addition of waste cooking oil fueled light duty diesel engine - A dual fuel approach .
  34. S. Masimalai, The Influence Of Air Side And Fuel Side Water Addition On Engine’S Behaviour Of A Biofuel Based Compresion Ignition Engine Under Oxygen Enriched Combustion, Thermal Science, 2020 The Influence Of Air Side And Fuel Side Water Addition On Engine’S Behaviour Of A Biofuel Based Compresion Ignition Engine Under Oxygen Enriched Combustion (1 Part A) : pp75-86 .