hoddoie@annauniv.edu 044 2235 7676/88

Latest Journals (Scopus indexed)

  1. A. Gnanavelbabu, E. Vinothkumar and M. Prahadeeswaran, Investigation on corrosion behaviour of metal oxide nanoparticles reinforced magnesium composites by salt spray and immersion corrosion test methods, Advances in Materials and Processing Technologies, 2024 Investigation on corrosion behaviour of metal oxide nanoparticles reinforced magnesium composites by salt spray and immersion corrosion test methods .
  2. A. Muthulakshmanan, R. Adalarasan, M. Santhanakumar, A. Gnanavelbabu, E. Makki and J. Giri, An investigation into cut surface quality of Al6061/Al2O3/B4C composite using hydro-abrasive machining process, AIP Advances, 2024 An investigation into cut surface quality of Al6061/Al2O3/B4C composite using hydro-abrasive machining process (3) .
  3. A. Muthulakshmanan, R. Adalarasan, M. Santhanakumar, A. Gnanavelbabu, E. Makki and J. Giri, An investigation into cut surface quality of Al6061/Al2O3/B4C composite using hydro-abrasive machining process, AIP Advances, 2024 An investigation into cut surface quality of Al6061/Al2O3/B4C composite using hydro-abrasive machining process (3) .
  4. M. Santhanakumar, R. Vijayakumar, R. Adalarasan and M. Rajesh, AN IN-DEPTH INVESTIGATION ON KERF ANGLE IN PIERCED HOLE ON INCONEL-625 SUPERALLOY USING ABRASIVE WATERJET CUTTING PROCESS, Surface Review and Letters, 2024 AN IN-DEPTH INVESTIGATION ON KERF ANGLE IN PIERCED HOLE ON INCONEL-625 SUPERALLOY USING ABRASIVE WATERJET CUTTING PROCESS .
  5. R. Vijaya Kumar, N. Srirangarajalu, M. Santhanakumar and R. Adalarasan, INVESTIGATION OF SURFACE CHARACTERISTICS IN PRECISION HOLE MACHINING OF INCONEL-625 USING ABRASIVE AQUA JET DRILLING, Surface Review and Letters, 2024 INVESTIGATION OF SURFACE CHARACTERISTICS IN PRECISION HOLE MACHINING OF INCONEL-625 USING ABRASIVE AQUA JET DRILLING (8) .
  6. A. Gnanavelbabu, E. Vinothkumar, N.S. Ross and M. Prahadeeswaran, Investigating the wear performance of AZ91D magnesium composites with ZnO, MnO, and TiO2 nanoparticles, International Journal of Advanced Manufacturing Technology, 2023 Investigating the wear performance of AZ91D magnesium composites with ZnO, MnO, and TiO2 nanoparticles (9-10) : pp4217-4237 .
  7. A. Gnanavelbabu, E. Vinothkumar, N.S. Ross, M.K. Gupta and M. Jamil, Tribo-corrosive wear and mechanical properties of nanoparticles reinforced Mg-AZ91D composites, Tribology International, 2023 Tribo-corrosive wear and mechanical properties of nanoparticles reinforced Mg-AZ91D composites .
  8. A. Gnanavelbabu, E. Vinothkumar, N.S. Ross, R. Rai and M. Kuntoğlu, Investigating the influence of NaCl concentration on the electrochemical corrosion behavior of metal oxide reinforced magnesium matrix composites, Archives of Civil and Mechanical Engineering, 2023 Investigating the influence of NaCl concentration on the electrochemical corrosion behavior of metal oxide reinforced magnesium matrix composites (2) .
  9. A. Gnanavelbabu, M. Prahadeeswaran, R. Rai, N.S. Ross and M.K. Gupta, Tribo-corrosive wear behaviour of squeeze-casted Mg/TiN/hBN composite under different ageing temperature, Tribology International, 2023 Tribo-corrosive wear behaviour of squeeze-casted Mg/TiN/hBN composite under different ageing temperature .
  10. R. Vijayakumar, N. Srirangarajalu, M. Santhanakumar and R. Adalarasan, Investigation in µ-WEDM of Inconel 625 superalloy using RSM-CCD technique, Materials and Manufacturing Processes, 2023 Investigation in µ-WEDM of Inconel 625 superalloy using RSM-CCD technique (4) : pp449-460 .
  11. R. Vijayakumar, N. Srirangarajalu, M. Santhanakumar, N.E.E. Paul and M. Rajesh, Investigation of Abrasive Aqua Jet Hole Making (AAJHM) parameters using desirability analysis on Inconel-625 space alloy, Journal of Manufacturing Processes, 2023 Investigation of Abrasive Aqua Jet Hole Making (AAJHM) parameters using desirability analysis on Inconel-625 space alloy : pp311-328 .
  12. S. Ayyanar, A. Gnanavelbabu, K. Rajkumar, P. Loganathan and K. Vishal, Investigation on microstructure and tribological performance of zirconium boride reinforced AZ91D magnesium alloy: Effect of processing routes, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2023 Investigation on microstructure and tribological performance of zirconium boride reinforced AZ91D magnesium alloy: Effect of processing routes (3) : pp692-707 .
  13. S. Palaniyappan, G. Annamalai, N.K. Sivakumar and P. Muthu, Development of functional gradient multi-material composites using Poly Lactic Acid and walnut shell reinforced Poly Lactic Acid filaments by fused filament fabrication technology, Journal of Building Engineering, 2023 Development of functional gradient multi-material composites using Poly Lactic Acid and walnut shell reinforced Poly Lactic Acid filaments by fused filament fabrication technology .
  14. V. Kamala, V. Sunder M, V.R. Sreedharan, K. Chargui, T. Zouadi and G.L. Tortorella, Testing the S-Curve Theory in OEM for Lean Operations: A Study on Organizational Transformation in the VUCA World, IEEE Transactions on Engineering Management, 2023 Testing the S-Curve Theory in OEM for Lean Operations: A Study on Organizational Transformation in the VUCA World .
  15. A. Gnanavelbabu and G. Gowtham, Titanium nitride concentration and coordination effect with hexagonal boron nitride enhancing the reciprocating wear behavior of AZ91D alloy-based composites, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2022 Titanium nitride concentration and coordination effect with hexagonal boron nitride enhancing the reciprocating wear behavior of AZ91D alloy-based composites .
  16. A. Gnanavelbabu and M. Prahadeeswaran, Comparative study of microstructure, mechanical, and wear behavior on Cu/hBN composites sintered through microwave and muffle furnace, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 2022 Comparative study of microstructure, mechanical, and wear behavior on Cu/hBN composites sintered through microwave and muffle furnace .
  17. A. Gnanavelbabu, K.T.S. Surendran and S. Kumar, Process Optimization and Studies on Mechanical Characteristics of AA2014/Al2O3 Nanocomposites Fabricated Through Ultrasonication Assisted Stir–Squeeze Casting, International Journal of Metalcasting, 2022 Process Optimization and Studies on Mechanical Characteristics of AA2014/Al2O3 Nanocomposites Fabricated Through Ultrasonication Assisted Stir–Squeeze Casting (2) : pp759-782 .
  18. A. Gnanavelbabu, X.J. Amul and K.T.S. Surendran, Investigation on the tribocorrosion and electrochemical corrosion behaviour of AA2014/Al2O3 nanocomposites fabricated through ultrasonication coupled stir-squeeze casting method, Journal of Applied Electrochemistry, 2022 Investigation on the tribocorrosion and electrochemical corrosion behaviour of AA2014/Al2O3 nanocomposites fabricated through ultrasonication coupled stir-squeeze casting method (4) : pp765-791 .
  19. A. Muthulakshmanan, R. Adalarasan and M. Santhanakumar, GREY INCIDENCE METHOD ON ABRASIVE WATER JET MACHINING OF AL7075/Al2O3 COMPOSITE, ARPN Journal of Engineering and Applied Sciences, 2022 GREY INCIDENCE METHOD ON ABRASIVE WATER JET MACHINING OF AL7075/Al2O3 COMPOSITE (11) : pp1184-1189 .
  20. C. Gayathri, V. Kamala, M.S. Gajanand and S. Yamini, Analysis of operational and financial performance of ports: an integrated fuzzy DEMATEL-TOPSIS approach, Benchmarking, 2022 Analysis of operational and financial performance of ports: an integrated fuzzy DEMATEL-TOPSIS approach (3) : pp1046-1066 .
  21. G.L. Arumparithy, R. Adalarasan, M. Santhanakumar and L. Mulugeta, Parameter Design in Carbonitriding of EN36, 16MnCr5, and AISI 4140 Steels Using Principal Component-Based Grey Incidence (PGI), Advances in Materials Science and Engineering, 2022 Parameter Design in Carbonitriding of EN36, 16MnCr5, and AISI 4140 Steels Using Principal Component-Based Grey Incidence (PGI) .
  22. G.L. Arumparithy, R. Adalarasan, M. Santhanakumar, N. Balaji and Y. Asres, Investigation in Gas Carburizing of AISI 4140, EN36, and 16MnCr5 Steels Using the Grey Incidence-Based Taguchi (GIBT) Method, Advances in Materials Science and Engineering, 2022 Investigation in Gas Carburizing of AISI 4140, EN36, and 16MnCr5 Steels Using the Grey Incidence-Based Taguchi (GIBT) Method .
  23. K. Mathiyazhagan, A. Gnanavelbabu, N. Kumar.N and V. Agarwal, A framework for implementing sustainable lean manufacturing in the electrical and electronics component manufacturing industry: An emerging economies country perspective, Journal of Cleaner Production, 2022 A framework for implementing sustainable lean manufacturing in the electrical and electronics component manufacturing industry: An emerging economies country perspective .
  24. K. Parthiban, P. Lakshmanan and A. Gnanavelbabu, Experimental and Theoretical Yield Strength of Silicon Carbide and Hexagonal Boron Nitride Reinforced Mg-Zn Nanocomposites Produced by the Combined Effects of Ultrasonication and Squeeze Casting, Silicon, 2022 Experimental and Theoretical Yield Strength of Silicon Carbide and Hexagonal Boron Nitride Reinforced Mg-Zn Nanocomposites Produced by the Combined Effects of Ultrasonication and Squeeze Casting .
  25. K. Rajchandar, R. Baskaran, P. Panchu K and M. Rajmohan, A novel fuzzy and reverse auction-based algorithm for task allocation with optimal path cost in multi-robot systems, Concurrency and Computation: Practice and Experience, 2022 A novel fuzzy and reverse auction-based algorithm for task allocation with optimal path cost in multi-robot systems (5) .
  26. K. Rajkumar, K. Ramraji, M. Aamir Qureshi and A. Gnanavelbabu, Tribo-effectiveness of co-equal concentration of hard and soft particulates in aluminium matrix, Materials Today: Proceedings, 2022 Tribo-effectiveness of co-equal concentration of hard and soft particulates in aluminium matrix .
  27. K. Vijayakumar and P. Robert, Human Factor Index Measurement Using an ISM-SEM-Fuzzy Approach, Sustainability (Switzerland), 2022 Human Factor Index Measurement Using an ISM-SEM-Fuzzy Approach (13) .
  28. K.T. Sunu Surendran and A. Gnanavelbabu, Tribological performance of AZ91D/HfCp magnesium composite prepared through stir-ultrasonic-squeeze casting technique, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 2022 Tribological performance of AZ91D/HfCp magnesium composite prepared through stir-ultrasonic-squeeze casting technique .
  29. K.T.S. Surendran, A. Gnanavelbabu and K. Rajkumar, Identification of self-lubricative mode for the ultrasonic treated AA6061-B4C-CNT hybrid composites, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2022 Identification of self-lubricative mode for the ultrasonic treated AA6061-B4C-CNT hybrid composites .
  30. M. Venkatesan and R. Baskaran, An Inclusive and Effective End-of-Life Vehicle Recycling System in India: Balancing Economy and Ecology from Grave to Cradle, Iranian Journal of Chemistry and Chemical Engineering, 2022 An Inclusive and Effective End-of-Life Vehicle Recycling System in India: Balancing Economy and Ecology from Grave to Cradle (4) : pp1501-1511 .
  31. P. Loganathan, K. Rajkumar, A. Gnanavelbabu and K. Vishal, Aluminium Silicate Concentration and Coordination effect with Tungsten sulphide improving Dry Sliding Wear Characteristics of AA7075 alloy Composites, Silicon, 2022 Aluminium Silicate Concentration and Coordination effect with Tungsten sulphide improving Dry Sliding Wear Characteristics of AA7075 alloy Composites .
  32. R. Narasimmalu, R. Sundaresan and R. Murugesan, Drilling performance analysis on hastelloy B2 through square hole, Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2022 Drilling performance analysis on hastelloy B2 through square hole (6) .
  33. R.H. Caldeira and A. Gnanavelbabu, An improved backtracking search algorithm for the flexible job shop rescheduling problem with new job insertions, European Journal of Industrial Engineering, 2022 An improved backtracking search algorithm for the flexible job shop rescheduling problem with new job insertions (1) : pp41-70 .
  34. V. Desingh and R. Baskaran, Internet of Things adoption barriers in the Indian healthcare supply chain: An ISM-fuzzy MICMAC approach, International Journal of Health Planning and Management, 2022 Internet of Things adoption barriers in the Indian healthcare supply chain: An ISM-fuzzy MICMAC approach (1) : pp318-351 .
  35. V. Kamala and T.P. Robert, FUZZY-LOGIC-BASED ERGONOMIC ASSESSMENT IN AN AUTOMOTIVE INDUSTRY, South African Journal of Industrial Engineering, 2022 FUZZY-LOGIC-BASED ERGONOMIC ASSESSMENT IN AN AUTOMOTIVE INDUSTRY (4) : pp109-125 .
  36. V. Kamala and T.P. Robert, FUZZY-LOGIC-BASED ERGONOMIC ASSESSMENT IN AN AUTOMOTIVE INDUSTRY, South African Journal of Industrial Engineering, 2022 FUZZY-LOGIC-BASED ERGONOMIC ASSESSMENT IN AN AUTOMOTIVE INDUSTRY (4) : pp109-125 .
  37. A. Gnanavelbabu, K.T.S. Surendran, P. Loganathan and E. Vinothkumar, Effect of ageing temperature on the corrosion behaviour of UHTC particulates reinforced magnesium composites fabricated through ultrasonic assisted squeeze casting process, Journal of Alloys and Compounds, 2021 Effect of ageing temperature on the corrosion behaviour of UHTC particulates reinforced magnesium composites fabricated through ultrasonic assisted squeeze casting process .
  38. A. Gnanavelbabu, R.H. Caldeira and T. Vaidyanathan, A simulation-based modified backtracking search algorithm for multi-objective stochastic flexible job shop scheduling problem with worker flexibility, Applied Soft Computing, 2021 A simulation-based modified backtracking search algorithm for multi-objective stochastic flexible job shop scheduling problem with worker flexibility .
  39. K. Mathiyazhagan, V. Agarwal, A. Appolloni, T. Saikouk and A. Gnanavelbabu, Integrating lean and agile practices for achieving global sustainability goals in Indian manufacturing industries, Technological Forecasting and Social Change, 2021 Integrating lean and agile practices for achieving global sustainability goals in Indian manufacturing industries .
  40. K. Rajchandar, R. Baskaran, K.P. Panchu and M. Rajmohan, An Approach to Improve Multi-objective Path Planning for Mobile Robot Navigation using the Novel Quadrant Selection Method, Defence Science Journal, 2021 An Approach to Improve Multi-objective Path Planning for Mobile Robot Navigation using the Novel Quadrant Selection Method (6) : pp748-761 .
  41. K. Suresh and R. Dillibabu, An integrated approach using IF-TOPSIS, fuzzy DEMATEL, and enhanced CSA optimized ANFIS for software risk prediction, Knowledge and Information Systems, 2021 An integrated approach using IF-TOPSIS, fuzzy DEMATEL, and enhanced CSA optimized ANFIS for software risk prediction (7) : pp1909-1934 .
  42. K.T. Sunu Surendran and A. Gnanavelbabu, Tribological behaviour of AZ91D/ultra-high-temperature ceramic composites at room and elevated temperatures, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2021 Tribological behaviour of AZ91D/ultra-high-temperature ceramic composites at room and elevated temperatures .
  43. P. Loganathan, A. Gnanavelbabu and K. Rajkumar, Influence of ZrB2/hBN particles on the wear behaviour of AA7075 composites fabricated through stir followed by squeeze cast technique, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2021 Influence of ZrB2/hBN particles on the wear behaviour of AA7075 composites fabricated through stir followed by squeeze cast technique (1) : pp149-160 .
  44. R. Caldeira and A. Gnanavelbabu, Solving the Flexible Job Shop Scheduling Problem Using an Effective Jaya Algorithm, Springer Proceedings in Materials, 2021 Solving the Flexible Job Shop Scheduling Problem Using an Effective Jaya Algorithm : pp125-132 .
  45. R.H. Caldeira and A. Gnanavelbabu, A Pareto based discrete Jaya algorithm for multi-objective flexible job shop scheduling problem, Expert Systems with Applications, 2021 A Pareto based discrete Jaya algorithm for multi-objective flexible job shop scheduling problem .
  46. R.H. Caldeira and A. Gnanavelbabu, A simheuristic approach for the flexible job shop scheduling problem with stochastic processing times, Simulation, 2021 A simheuristic approach for the flexible job shop scheduling problem with stochastic processing times (3) : pp215-236 .
  47. S. Ayyanar, A. Gnanavelbabu, K. Rajkumar and P. Loganathan, Studies on High Temperature Wear and Friction Behaviour of AA6061/B4C/hBN Hybrid Composites, Metals and Materials International, 2021 Studies on High Temperature Wear and Friction Behaviour of AA6061/B4C/hBN Hybrid Composites (8) : pp3040-3057 .
  48. S.K. Dharmalingam and R. Murugesan, Multi-objective optimization of wear performance of epoxy composites by gray-based response surface methodology, Polymer Composites, 2021 Multi-objective optimization of wear performance of epoxy composites by gray-based response surface methodology (8) : pp3716-3721 .
  49. V. Queen Florence Mary and M. Rajmohan, Impact of sustainability on supply chain risks in manufacturing industries – an empirical analysis, Journal of Environmental Protection and Ecology, 2021 Impact of sustainability on supply chain risks in manufacturing industries – an empirical analysis (3) : pp987-997 .
  50. A. Gnanavelbabu and K. Rajkumar, Experimental Characterization of Dimensional and Surface Alternation of Straight and Angular Cutting on Self-lubricating Composite: A Wire EDM Approach, Arabian Journal for Science and Engineering, 2020 Experimental Characterization of Dimensional and Surface Alternation of Straight and Angular Cutting on Self-lubricating Composite: A Wire EDM Approach (7) : pp5859-5872 .
  51. A. Gnanavelbabu and P. Saravanan, Experimental Investigations of Abrasive Waterjet Machining Parameters on Titanium Alloy Ti-6Al-4V Using RSM and Evolutionary Computational Techniques, Lecture Notes on Multidisciplinary Industrial Engineering, 2020 Experimental Investigations of Abrasive Waterjet Machining Parameters on Titanium Alloy Ti-6Al-4V Using RSM and Evolutionary Computational Techniques : pp413-425 .
  52. A. Gnanavelbabu, K.T. Sunu Surendran and K. Rajkumar, Performance Evaluation of Abrasive Water Jet Machining on AA6061-B4C-HBN Hybrid Composites Using Taguchi Methodology, Lecture Notes on Multidisciplinary Industrial Engineering, 2020 Performance Evaluation of Abrasive Water Jet Machining on AA6061-B4C-HBN Hybrid Composites Using Taguchi Methodology : pp651-660 .
  53. J.P. Devarajan and T. Paul Robert, Swarm intelligent data aggregation in wireless sensor network, International Journal of Swarm Intelligence Research, 2020 Swarm intelligent data aggregation in wireless sensor network (2) : pp1-18 .
  54. K. Suresh and R. Dillibabu, A novel fuzzy mechanism for risk assessment in software projects, Soft Computing, 2020 A novel fuzzy mechanism for risk assessment in software projects (3) : pp1683-1705 .
  55. K.M. Nambiraj, K. Rajkumar, M. Rajesh and A. Gnanavelbabu, Effect of Solid Lubricant in Dry Machining on Al-B4C Composite, Springer Proceedings in Materials, 2020 Effect of Solid Lubricant in Dry Machining on Al-B4C Composite : pp587-596 .
  56. M. Karthick, T.P. Robert and C.S. Kumar, HFACS-based FAHP implementation to identify critical factors influencing human error occurrence in nuclear plant control room, Soft Computing, 2020 HFACS-based FAHP implementation to identify critical factors influencing human error occurrence in nuclear plant control room (21) : pp16577-16591 .
  57. M. Rajesh, K. Rajkumar, A. Gnanavelbabu and K.M. Nambiraj, The Role of HBN Solid Lubricant Reducing Cutting Forces of Dry Machined Al-B4C Composite, Lecture Notes on Multidisciplinary Industrial Engineering, 2020 The Role of HBN Solid Lubricant Reducing Cutting Forces of Dry Machined Al-B4C Composite : pp697-705 .
  58. P. Govindasamy and R. Dillibabu, Development of software reliability models using a hybrid approach and validation of the proposed models using big data, Journal of Supercomputing, 2020 Development of software reliability models using a hybrid approach and validation of the proposed models using big data (4) : pp2252-2265 .
  59. P. Loganathan, A. Gnanavelbabu, K. Rajkumar and S. Ayyanar, Microstructural characteristics and mechanical behaviour of AA7075/TiB2 composite, Materials Science Forum, 2020 Microstructural characteristics and mechanical behaviour of AA7075/TiB2 composite : pp40-46 .
  60. R.H. Caldeira, A. Gnanavelbabu and T. Vaidyanathan, An effective backtracking search algorithm for multi-objective flexible job shop scheduling considering new job arrivals and energy consumption, Computers and Industrial Engineering, 2020 An effective backtracking search algorithm for multi-objective flexible job shop scheduling considering new job arrivals and energy consumption .
  61. S. Kasiviswanathan and D. Ramalingam, Development and application of user review quality model for embedded system, Microprocessors and Microsystems, 2020 Development and application of user review quality model for embedded system .
  62. S. Muthuvel, M. Naresh Babu and N. Muthukrishnan, Copper nanofluids under minimum quantity lubrication during drilling of AISI 4140 steel, Australian Journal of Mechanical Engineering, 2020 Copper nanofluids under minimum quantity lubrication during drilling of AISI 4140 steel (sup1) : ppS151-S164 .
  63. T. Prabhuram, M. Rajmohan, Y. Tan and R. Robert Johnson, Performance evaluation of Omni channel distribution network configurations using multi criteria decision making techniques, Annals of Operations Research, 2020 Performance evaluation of Omni channel distribution network configurations using multi criteria decision making techniques (1) : pp435-456 .