om@annauniv.edu 044 2235 7711/9494

Latest Journals (Scopus indexed)

  1. A. Arun, S. Santosh and K. Rajkumar, Investigations on the interaction of laser parameters for efficient microdrilling of NiTiV smart alloy system, Laser Physics, 2024 Investigations on the interaction of laser parameters for efficient microdrilling of NiTiV smart alloy system (8) .
  2. B. Chandrasekaran, R. Kaliyamoorthy, A. Murugavel, G. Vinayagam, E. NoorMohammed and S.H. Karimullah, Fiber Laser Cutting of AISI 431 Martensitic Stainless Steel: An Experimental Investigation †, Engineering Proceedings, 2024 Fiber Laser Cutting of AISI 431 Martensitic Stainless Steel: An Experimental Investigation † (1) .
  3. C. Balasubramaniyan and K. Rajkumar, Identification of parametric conditions and the influence of laser interaction on the material removal and surface characteristics of 904 L steel super austenitic stainless steel, International Journal on Interactive Design and Manufacturing, 2024 Identification of parametric conditions and the influence of laser interaction on the material removal and surface characteristics of 904 L steel super austenitic stainless steel .
  4. K. Vishal, A. Arun and K. Rajkumar, Extraction and characterization of steam-exploded silane-treated cellulosic natural Vernonia elaeagnifolia long fibre, Industrial Crops and Products, 2024 Extraction and characterization of steam-exploded silane-treated cellulosic natural Vernonia elaeagnifolia long fibre .
  5. P. Monish, K.L. Hari Krishna and K. Rajkumar, A surface and corrosion characterisation of micro arc oxidation treated friction stir welded ZM21 and ZE41 magnesium alloy: a comparison study, Physica Scripta, 2024 A surface and corrosion characterisation of micro arc oxidation treated friction stir welded ZM21 and ZE41 magnesium alloy: a comparison study (8) .
  6. V. Kumar, A. Arun, K. Rajkumar and S. Palaniyappan, Effect of Kigelia pinnata biochar inclusion on mechanical and thermal properties of curtain climber fiber reinforced epoxide biocomposites, Polymer Composites, 2024 Effect of Kigelia pinnata biochar inclusion on mechanical and thermal properties of curtain climber fiber reinforced epoxide biocomposites .
  7. A. Arun, K. Rajkumar and K. Vishal, Process Parameters for Optimization in Abrasive Water Jet Machining (AWJM) of Silicon-Filled Epoxy Glass Fibre Polymer Composites, Journal of Inorganic and Organometallic Polymers and Materials, 2023 Process Parameters for Optimization in Abrasive Water Jet Machining (AWJM) of Silicon-Filled Epoxy Glass Fibre Polymer Composites (5) : pp1339-1356 .
  8. A. Arun, K. Rajkumar and S. Santosh, Fiber laser cutting study on ternary NiTiV shape memory alloy, Materials and Manufacturing Processes, 2023 Fiber laser cutting study on ternary NiTiV shape memory alloy .
  9. A. Perumal, R. Kaliyamoorthy and V. Kumar, Impact of recovered silicon particles incorporation on tribo-characteristics of a poly ether ether ketone polymer composite, High Performance Polymers, 2023 Impact of recovered silicon particles incorporation on tribo-characteristics of a poly ether ether ketone polymer composite (8) : pp863-879 .
  10. C. Balasubramaniyan and K. Rajkumar, Enhancing low-speed WEDM machining capabilities on Nitronic-50 with a constant frequency ultrasonic hybrid method, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2023 Enhancing low-speed WEDM machining capabilities on Nitronic-50 with a constant frequency ultrasonic hybrid method .
  11. C. Balasubramaniyan, K. Rajkumar and S. Santosh, Fiber Laser Cutting of Cu–Zr Added Quaternary NiTi Shape Memory Alloy: Experimental Investigation and Optimization, Arabian Journal for Science and Engineering, 2023 Fiber Laser Cutting of Cu–Zr Added Quaternary NiTi Shape Memory Alloy: Experimental Investigation and Optimization (3) : pp3665-3679 .
  12. C. Uva Narayanan, P. Suya Prem Anand, G. Manivasagam and V. Ezhilmaran, Investigating the compression and fretting wear behaviour of FDM printed PLA samples for bone fixation, Advances in Materials and Processing Technologies, 2023 Investigating the compression and fretting wear behaviour of FDM printed PLA samples for bone fixation .
  13. G. Kalusuraman, S.T. Kumaran, K. Balamurugan, N. Sivashanmugam, P. Sivaprakasam, R. Kurniawan and V. Ezhilmaran, Vibration Studies on Fiber Reinforced Composites–a Review, Journal of Natural Fibers, 2023 Vibration Studies on Fiber Reinforced Composites–a Review (1) .
  14. K. Vishal, K. Rajkumar, P. Sabarinathan and A. Arun, Mechanical and thermal characteristics of steam-exploded silane grafted Kigelia Pinnata fruit (KPF) fiber reinforced vinyl ester polymer composites, Polymer Composites, 2023 Mechanical and thermal characteristics of steam-exploded silane grafted Kigelia Pinnata fruit (KPF) fiber reinforced vinyl ester polymer composites .
  15. K. Vishal, K.M. Nambiraj and K. Rajkumar, Mechanical, Thermal, and Erosive Behavior of Recovered Inorganic Diamond Particles in Polyepoxide Composites, Journal of Inorganic and Organometallic Polymers and Materials, 2023 Mechanical, Thermal, and Erosive Behavior of Recovered Inorganic Diamond Particles in Polyepoxide Composites .
  16. K.T.S. Surendran, A. Gnanavelbabu and K. Rajkumar, Identification of self-lubricative mode for the ultrasonic treated AA6061-B4C-CNT hybrid composites, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2023 Identification of self-lubricative mode for the ultrasonic treated AA6061-B4C-CNT hybrid composites (4) : pp784-797 .
  17. M. Dhananchezian, K. Rajkumar and S. Prithivirajan, Cutting velocity influenced machinability of Monel 400 by coated tool, Materials and Manufacturing Processes, 2023 Cutting velocity influenced machinability of Monel 400 by coated tool (1) : pp116-125 .
  18. N.E. Arun Kumar, M. Subramanian, A. Suresh Babu and R. Elakkiyadasan, Performance evaluation of cryogenic treated and untreated brass electrode in wire-EDM, Materials and Manufacturing Processes, 2023 Performance evaluation of cryogenic treated and untreated brass electrode in wire-EDM .
  19. N.E.A. Kumar, M. Ganesh, A.S. Babu and R. Elakkiyadasan, Effect of Cryo-treatment of wires on machining performance of WEDM, Materials and Manufacturing Processes, 2023 Effect of Cryo-treatment of wires on machining performance of WEDM (14) : pp1837-1846 .
  20. P. Monish, K.L. Hari Krishna and K. Rajkumar, Manufacturing and characterisation of magnesium composites reinforced by nanoparticles: a review, Materials Science and Technology (United Kingdom), 2023 Manufacturing and characterisation of magnesium composites reinforced by nanoparticles: a review (15) : pp1858-1876 .
  21. R. Kirubakaran, R. Kaliyamoorthy, R. Munusamy and B. Annamalai, Mechanical and vibration behavior of surface-modified titanium sheet interleaved with woven basalt/flax fiber metal laminates, Polymer Composites, 2023 Mechanical and vibration behavior of surface-modified titanium sheet interleaved with woven basalt/flax fiber metal laminates (12) : pp8442-8453 .
  22. R. Velusamy, A.S. Babu, M.R. Swaminathan and P. Hariharan, Evaluation of Mechanical, Tribological, and Thermal Characterization of GZ TBCs for Heavy Duty Diesel Engine Application, Journal of Materials Engineering and Performance, 2023 Evaluation of Mechanical, Tribological, and Thermal Characterization of GZ TBCs for Heavy Duty Diesel Engine Application .
  23. S. Ayyanar, A. Gnanavelbabu, K. Rajkumar, P. Loganathan and K. Vishal, Investigation on microstructure and tribological performance of zirconium boride reinforced AZ91D magnesium alloy: Effect of processing routes, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2023 Investigation on microstructure and tribological performance of zirconium boride reinforced AZ91D magnesium alloy: Effect of processing routes (3) : pp692-707 .
  24. S. Mahalingam and A.S. Babu, Experimental Study on Woven Ramie Fibre Epoxy Composite with Silane-Treated Groundnut shell Powder as a Filler Material, Transactions of Famena, 2023 Experimental Study on Woven Ramie Fibre Epoxy Composite with Silane-Treated Groundnut shell Powder as a Filler Material (1) : pp1-12 .
  25. S. Sundaraselvan, N. Senthilkumar, K. Rajkumar and T. Balamurugan, OPTIMIZATION of WEAR STUDIES on LASER CLADDED AZ61 MAGNESIUM ALLOY with NANO-TITANIUM DIOXIDE USING GREY RELATIONAL ANALYSIS, Surface Review and Letters, 2023 OPTIMIZATION of WEAR STUDIES on LASER CLADDED AZ61 MAGNESIUM ALLOY with NANO-TITANIUM DIOXIDE USING GREY RELATIONAL ANALYSIS (4) .
  26. V. Ezhilmaran, P. Suya Prem Anand, S. Kannan, N. Sivashanmugam, K. Jayakrishna and G. Kalusuraman, Review of bioresorbable AZ91, AZ31 and Mg–Zn–Ca implants and their manufacturing methods, Materials Science and Technology (United Kingdom), 2023 Review of bioresorbable AZ91, AZ31 and Mg–Zn–Ca implants and their manufacturing methods (8) : pp901-925 .
  27. V. Kumar and R. Kaliyamoorthy, Friction and wear characteristics of synthetic diamond and graphene-filled polyether ether ketone composites, High Performance Polymers, 2023 Friction and wear characteristics of synthetic diamond and graphene-filled polyether ether ketone composites (4) : pp348-365 .
  28. A. K.V, S. P and P. Hariharan, Performance comparison of EDM oil and biodiesel flushing media while µED milling of Inconel 718, Materials and Manufacturing Processes, 2022 Performance comparison of EDM oil and biodiesel flushing media while µED milling of Inconel 718 .
  29. B. Balaji, B.M. Prasanth and P. Hariharan, Semi-Empirical Modeling of Laser Micro-Drilling on Aluminium 6061 Alloy for Prediction of Geometrical Features, Lasers in Manufacturing and Materials Processing, 2022 Semi-Empirical Modeling of Laser Micro-Drilling on Aluminium 6061 Alloy for Prediction of Geometrical Features (3) : pp392-433 .
  30. B. Elumalai, S. Gowri, P. Hariharan and K.V. Arun Pillai, Experimental investigations on μeD milling of inconel 718 with nano SiC abrasive mixed dielectric, Materials Research, 2022 Experimental investigations on μeD milling of inconel 718 with nano SiC abrasive mixed dielectric .
  31. B.S.C. Yadav, A. Muniappan, K.L. Harikrishna and K. Rajkumar, Performance of different wire electrode materials on kerf width in WEDM of aluminum hybrid composite, Materials Today: Proceedings, 2022 Performance of different wire electrode materials on kerf width in WEDM of aluminum hybrid composite : pp1347-1355 .
  32. C. Balasubramaniyan, K. Rajkumar and S. Santosh, Enhancement of machining and surface quality of quaternary alloyed NiTiCuZr shape memory alloy through ultrasonic vibration coupled WEDM, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 2022 Enhancement of machining and surface quality of quaternary alloyed NiTiCuZr shape memory alloy through ultrasonic vibration coupled WEDM (4) : pp816-833 .
  33. C. Balasubramaniyan, S. Santosh and K. Rajkumar, Surface quality and morphology of NiTiCuZr shape memory alloy machined using thermal-energy processes: An examination of comparative topography, Surface Topography: Metrology and Properties, 2022 Surface quality and morphology of NiTiCuZr shape memory alloy machined using thermal-energy processes: An examination of comparative topography (3) .
  34. C. Devanathan, A. Suresh Babu, S. Senthil Murugan, E. Shankar and R. Giri, REVIEW OF JOINING VARIOUS MATERIALS BY FSW PROCESS AND APPLICATIONS, Annals of "Dunarea de Jos" University of Galati, Fascicle XII, Welding Equipment and Technology, 2022 REVIEW OF JOINING VARIOUS MATERIALS BY FSW PROCESS AND APPLICATIONS : pp75-88 .
  35. G. Selvaraj, R. Kaliyamoorthy and R. Kirubakaran, Mechanical, thermogravimetric, and dynamic mechanical analysis of basalt and flax fibers intertwined vinyl ester polymer composites, Polymer Composites, 2022 Mechanical, thermogravimetric, and dynamic mechanical analysis of basalt and flax fibers intertwined vinyl ester polymer composites (4) : pp2196-2207 .
  36. J. Deepak and P. Hariharan, Study on the influence of auxiliary electrode and magnet on electrochemical machining of SS304 using NaCl and NaNO3, Surface Topography: Metrology and Properties, 2022 Study on the influence of auxiliary electrode and magnet on electrochemical machining of SS304 using NaCl and NaNO3 (1) .
  37. J. Deepak and P. Hariharan, Investigation of electrochemical machining on SS304 using NaCl and NaNo3 as electrolyte, Materials and Manufacturing Processes, 2022 Investigation of electrochemical machining on SS304 using NaCl and NaNo3 as electrolyte (15) : pp1790-1803 .
  38. K. Rajkumar, K. Ramraji, M. Aamir Qureshi and A. Gnanavelbabu, Tribo-effectiveness of co-equal concentration of hard and soft particulates in aluminium matrix, Materials Today: Proceedings, 2022 Tribo-effectiveness of co-equal concentration of hard and soft particulates in aluminium matrix : pp1233-1237 .
  39. K. Rajkumar, K.M. Nambiraj, K. Ramraji and B.S.H. Khan, Influence of silicon filler size and concentration on thermal stability and erosion wear resistance of polymer composite, Silicon, 2022 Influence of silicon filler size and concentration on thermal stability and erosion wear resistance of polymer composite (15) : pp9595-9608 .
  40. K. Rajkumar, M. Rishiram, K. Ramraji and M. Rajesh, Accelerated tribological testing based life prediction of aluminium-graphite tribo composite, Materials Today: Proceedings, 2022 Accelerated tribological testing based life prediction of aluminium-graphite tribo composite : pp1152-1156 .
  41. K. Ramraji, K. Rajkumar, K.L. Harikrishna and P. Sarmaji Kumar, Mechanical and dynamic mechanical analysis of calcium carbonate filler interleaved with basalt polymeric laminates, Materials Today: Proceedings, 2022 Mechanical and dynamic mechanical analysis of calcium carbonate filler interleaved with basalt polymeric laminates : pp1342-1346 .
  42. K. Ramraji, K. Rajkumar, M. Subbiah, K. Balachandar and P. Sarmaji Kumar, Stacking layer effect on mechanical and vibration behaviour of woven glass intertwined with kenaf fiber polymeric composites, Materials Today: Proceedings, 2022 Stacking layer effect on mechanical and vibration behaviour of woven glass intertwined with kenaf fiber polymeric composites : pp1356-1360 .
  43. K. Vishal and K. Rajkumar, Dry sliding wear behavior of Poly Ether Ether Ketone (PEEK) reinforced with graphite and synthetic diamond particles, Diamond and Related Materials, 2022 Dry sliding wear behavior of Poly Ether Ether Ketone (PEEK) reinforced with graphite and synthetic diamond particles .
  44. K. Vishal, K. Rajkumar and P. Sabarinathan, Effect of Recovered Silicon Filler Inclusion on Mechanical and Tribological Properties of Polytetrafluoroethylene (PTFE) Composite, Silicon, 2022 Effect of Recovered Silicon Filler Inclusion on Mechanical and Tribological Properties of Polytetrafluoroethylene (PTFE) Composite (9) : pp4601-4610 .
  45. K. Vishal, K. Rajkumar, M.S. Nitin and P. Sabarinathan, Kigelia africana fruit biofibre polysaccharide extraction and biofibre development by silane chemical treatment, International Journal of Biological Macromolecules, 2022 Kigelia africana fruit biofibre polysaccharide extraction and biofibre development by silane chemical treatment : pp1248-1259 .
  46. K. Vishal, K. Rajkumar, P. Sabarinathan and V. Dhinakaran, Mechanical and Wear Characteristics Investigation on 3D Printed Silicon Filled Poly (Lactic Acid) Biopolymer Composite Fabricated by Fused Deposition Modeling, Silicon, 2022 Mechanical and Wear Characteristics Investigation on 3D Printed Silicon Filled Poly (Lactic Acid) Biopolymer Composite Fabricated by Fused Deposition Modeling (15) : pp9379-9391 .
  47. K.M. Nambiraj, K. Rajkumar and P. Sabarinathan, A Novel Approach on Reusing Silicon Wafer Kerf Particle as Potential Filler Material in Polymer Composite, Silicon, 2022 A Novel Approach on Reusing Silicon Wafer Kerf Particle as Potential Filler Material in Polymer Composite (4) : pp1537-1548 .
  48. K.V. Arun Pillai and P. Hariharan, Surface characteristics and recast layer thickness analysis of µed machined Inconel 718 alloy with biodiesels, Materials and Manufacturing Processes, 2022 Surface characteristics and recast layer thickness analysis of µed machined Inconel 718 alloy with biodiesels .
  49. K.V.A. Pillai and P. Hariharan, Experimental Investigation on Surface and Machining Characteristics of Micro ED Milling of Ti-6Al-4 V with Different Nano Powder Mixed Dielectrics, Silicon, 2022 Experimental Investigation on Surface and Machining Characteristics of Micro ED Milling of Ti-6Al-4 V with Different Nano Powder Mixed Dielectrics (6) : pp2871-2894 .
  50. K.V.A. Pillai and P. Hariharan, Feasibility study of biodiesels in μED milling of Ti–6Al–4V under different parametric conditions, Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2022 Feasibility study of biodiesels in μED milling of Ti–6Al–4V under different parametric conditions (11) .
  51. M. Rajesh, K. Rajkumar, R. Vijayakumar and K. Ramraji, Investigation and optimization of AWJM on flax fiber stacked laminate by desirability approach, Materials Today: Proceedings, 2022 Investigation and optimization of AWJM on flax fiber stacked laminate by desirability approach : pp1146-1151 .
  52. M. Rajesh, R. Kaliyamoorthy and R. Kirubakaran, Parametric investigation on surface roughness and hole quality of Ti metal hybrid fibers cored laminate (MFL) during abrasive water jet drilling, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2022 Parametric investigation on surface roughness and hole quality of Ti metal hybrid fibers cored laminate (MFL) during abrasive water jet drilling (8) : pp4147-4165 .
  53. M. Rajesh, R. Vijayakumar, K. Rajkumar and K. Ramraji, Experimental investigation and striation study of Inconel 718 by using abrasive water jet drilling, Materials Today: Proceedings, 2022 Experimental investigation and striation study of Inconel 718 by using abrasive water jet drilling : pp1277-1281 .
  54. N.E. Arun Kumar, A. Suresh Babu, M. Subramanian and C. Pradeep Kumar, INFLUENCE of WIRE-EDM PARAMETERS on SURFACE CHARACTERISTICS of SUPERALLOY MONEL 400, Surface Review and Letters, 2022 INFLUENCE of WIRE-EDM PARAMETERS on SURFACE CHARACTERISTICS of SUPERALLOY MONEL 400 (3) .
  55. N.E. Arun kumar, A. Suresh Babu, M. Subramanian and N. Arunkumar, Influence of MQL on performance evaluation of EN19 steel under centreless grinding, Materials and Manufacturing Processes, 2022 Influence of MQL on performance evaluation of EN19 steel under centreless grinding .
  56. P. Loganathan, K. Rajkumar, A. Gnanavelbabu and K. Vishal, Aluminium Silicate Concentration and Coordination effect with Tungsten sulphide improving Dry Sliding Wear Characteristics of AA7075 alloy Composites, Silicon, 2022 Aluminium Silicate Concentration and Coordination effect with Tungsten sulphide improving Dry Sliding Wear Characteristics of AA7075 alloy Composites .
  57. P. Sabarinathan, V.E. Annamalai, K. Rajkumar, K. Vishal and V. Dhinakaran, Synthesis and characterization of randomly oriented silane-grafted novel bio-cellulosic fish tail palm fiber–reinforced vinyl ester composite, Biomass Conversion and Biorefinery, 2022 Synthesis and characterization of randomly oriented silane-grafted novel bio-cellulosic fish tail palm fiber–reinforced vinyl ester composite .
  58. P. Sivaprakasam, J. Udaya Prakash and P. Hariharan, Enhancement of material removal rate in magnetic field-assisted micro electric discharge machining of Aluminium Matrix Composites, International Journal of Ambient Energy, 2022 Enhancement of material removal rate in magnetic field-assisted micro electric discharge machining of Aluminium Matrix Composites (1) : pp584-589 .
  59. P. Sivaprakasam, P. Hariharan and G. Elias, Experimental investigations on magnetic field-assisted micro-electric discharge machining of inconel alloy, International Journal of Ambient Energy, 2022 Experimental investigations on magnetic field-assisted micro-electric discharge machining of inconel alloy (1) : pp2619-2626 .
  60. R. Kirubakaran, K. Rajkumar and M. Rajesh, Influencing Behavior Study of Natural Almond Shell Filler on the Tensile, Thermal, and Free Vibrational Properties of Flax Fiber Intertwined Vinyl Ester Composites, Journal of Natural Fibers, 2022 Influencing Behavior Study of Natural Almond Shell Filler on the Tensile, Thermal, and Free Vibrational Properties of Flax Fiber Intertwined Vinyl Ester Composites (16) : pp12959-12970 .
  61. S. Mahalingam and A.S. Babu, Characterization of 3-Aminopropyltriethoxysilane Treated Stacked Silicate Nanoclay and Red Matta-RHA Biosilica Woven Ramie Fibre Epoxy Composite, Silicon, 2022 Characterization of 3-Aminopropyltriethoxysilane Treated Stacked Silicate Nanoclay and Red Matta-RHA Biosilica Woven Ramie Fibre Epoxy Composite .
  62. S. Palaniyappan, A. Veiravan, R. Kaliyamoorthy and V. Kumar, Sustainable solution to low-cost alternative abrasive from electric ceramic insulator waste for use in abrasive water jet machining, International Journal of Advanced Manufacturing Technology, 2022 Sustainable solution to low-cost alternative abrasive from electric ceramic insulator waste for use in abrasive water jet machining (7-8) : pp5243-5257 .
  63. S. Palaniyappan, A. Veiravan, R. Kaliyamoorthy, V. Kumar and D. Veeman, A spatial distribution effect of almond shell bio filler on physical, mechanical, thermal deflection and water absorption properties of vinyl ester polymer composite, Polymer Composites, 2022 A spatial distribution effect of almond shell bio filler on physical, mechanical, thermal deflection and water absorption properties of vinyl ester polymer composite (5) : pp3204-3218 .
  64. S. Palaniyappan, D. Veeman, K. Rajkumar, K. Vishal, R. Kishore and L. Natrayan, Photovoltaic Industrial Waste as Substitutional Reinforcement in the Preparation of Additively Manufactured Acrylonitrile Butadiene Styrene Composite, Arabian Journal for Science and Engineering, 2022 Photovoltaic Industrial Waste as Substitutional Reinforcement in the Preparation of Additively Manufactured Acrylonitrile Butadiene Styrene Composite (12) : pp15851-15863 .
  65. S. Ram Prakash, G. Selvakumar and K. Rajkumar, Spark plasma processing of semi-conductive titanium carbide dispersed alumina composites, Materials and Manufacturing Processes, 2022 Spark plasma processing of semi-conductive titanium carbide dispersed alumina composites (1) : pp81-89 .
  66. V. Ezhilmaran, Experimental analysis of Nd3+:YAG laser-assisted ablation on piston ring surface in an environmentally friendly underwater ambiance, Journal of Manufacturing Processes, 2022 Experimental analysis of Nd3+:YAG laser-assisted ablation on piston ring surface in an environmentally friendly underwater ambiance : pp311-319 .
  67. Elumalai B., Gowri S., Hariharan P. and Arun Pillai K.V., The effect of discharge energy and nano Al2O3on μED milling of Inconel 718, Surface Topography: Metrology and Properties, 2021 The effect of discharge energy and nano Al2O3on μED milling of Inconel 718 (4) .
  68. B. Mouliprasanth and P. Hariharan, Influence of Variant Electrolyte in Electrochemical Micromachining of Micro Holes in SMA Using Taguchi Optimization, Russian Journal of Electrochemistry, 2021 Influence of Variant Electrolyte in Electrochemical Micromachining of Micro Holes in SMA Using Taguchi Optimization (3) : pp197-213 .
  69. C. Balasubramaniyan, K. Rajkumar and S. Santosh, Wire-EDM machinability investigation on quaternary Ni44Ti50Cu4Zr2 shape memory alloy, Materials and Manufacturing Processes, 2021 Wire-EDM machinability investigation on quaternary Ni44Ti50Cu4Zr2 shape memory alloy (10) : pp1161-1170 .
  70. C. Devanathan and A. Sureshbabu, Multi objective optimization of process parameters by firefly algorithm during the friction stir welding of metal matrix composites, Transactions of Famena, 2021 Multi objective optimization of process parameters by firefly algorithm during the friction stir welding of metal matrix composites (1) .
  71. D. Ravikanth and P. Hariharan, Psychophysics Experiment to Check the Temperature Impacts Over Human Fingertips for the Application of Textural Applications in Haptics Technology, Arabian Journal for Science and Engineering, 2021 Psychophysics Experiment to Check the Temperature Impacts Over Human Fingertips for the Application of Textural Applications in Haptics Technology (8) : pp7265-7272 .
  72. E. Rajkeerthi and P. Hariharan, Evaluation of surface integrity in electrochemical micromachining of A286 super alloy, Surface Topography: Metrology and Properties, 2021 Evaluation of surface integrity in electrochemical micromachining of A286 super alloy (4) .
  73. E. Rajkeerthi and P. Hariharan, Evaluation of surface integrity in electrochemical micromachining of A286 super alloy, Surface Topography: Metrology and Properties, 2021 Evaluation of surface integrity in electrochemical micromachining of A286 super alloy (4) .
  74. E. Rajkeerthi, P. Hariharan and N. Pradeep, Enhancing machining rate and geometrical accuracy in electrochemical micromachining of Co-Ni-Cr-W superalloy, Materials and Manufacturing Processes, 2021 Enhancing machining rate and geometrical accuracy in electrochemical micromachining of Co-Ni-Cr-W superalloy (4) : pp488-500 .
  75. E. Rajkeerthi, P. Hariharan and N. Pradeep, Enhancing machining rate and geometrical accuracy in electrochemical micromachining of Co-Ni-Cr-W superalloy, Materials and Manufacturing Processes, 2021 Enhancing machining rate and geometrical accuracy in electrochemical micromachining of Co-Ni-Cr-W superalloy (4) : pp488-500 .
  76. G. Selvakumar, S. Ram Prakash and K. Rajkumar, Evaluation of the mechanical and electrical properties of spark plasma sintered titanium carbide reinforced alumina ceramic composite, Archives of Metallurgy and Materials, 2021 Evaluation of the mechanical and electrical properties of spark plasma sintered titanium carbide reinforced alumina ceramic composite (3) : pp831-838 .
  77. K. Ramraji, K. Rajkumar, G. Selvakumar and S. Ram Prakash, Investigations on the influence of particle reinforcement and wire materials on the surface quality and machining characteristics of AA6061-TiB2alloy in WEDM, Surface Topography: Metrology and Properties, 2021 Investigations on the influence of particle reinforcement and wire materials on the surface quality and machining characteristics of AA6061-TiB2alloy in WEDM (3) .
  78. K. VishalRajkumarAnnamalai, K. Rajkumar and V.E. Annamalai, Wear and tribofilm characterization of bamboo CNT (B-CNT)-peek composite with incremental blending of submicron synthetic diamond particles, Wear, 2021 Wear and tribofilm characterization of bamboo CNT (B-CNT)-peek composite with incremental blending of submicron synthetic diamond particles .
  79. K.V. Arun Pillai and P. Hariharan, Experimental investigation on the recast layer and performance indicators during nano powder mixed μeD miling of Ti-6Al-4V, Surface Topography: Metrology and Properties, 2021 Experimental investigation on the recast layer and performance indicators during nano powder mixed μeD miling of Ti-6Al-4V (2) .
  80. K.V. Arun Pillai, P. Hariharan and R. Krishna Murthy, Micro ED Milling of Ti-6Al-4V with SiC Nano Powder Mixed Dielectrics at Different Ranges of Discharge Energy, Silicon, 2021 Micro ED Milling of Ti-6Al-4V with SiC Nano Powder Mixed Dielectrics at Different Ranges of Discharge Energy (6) : pp1827-1837 .
  81. M. Jaivignesh, A.S. Babu and G. Arumaikkannu, A study on compressive behaviour and biocompatibility of direct metal laser sintered Ti64 cellular structures, Materials Research Express, 2021 A study on compressive behaviour and biocompatibility of direct metal laser sintered Ti64 cellular structures (2) .
  82. M. Rajesh, K. Rajkumar and V.E. Annamalai, Abrasive water jet machining on Ti metal-interleaved basalt-flax fiber laminate, Materials and Manufacturing Processes, 2021 Abrasive water jet machining on Ti metal-interleaved basalt-flax fiber laminate (3) : pp329-340 .
  83. M.B. Prasanth and P. Hariharan, Evaluation of 3D surface roughness in electrochemical micromachining of Nitinol, Surface Topography: Metrology and Properties, 2021 Evaluation of 3D surface roughness in electrochemical micromachining of Nitinol (4) .
  84. N.E.A. Kumar, A.S. Babu, N. Sathishkumar and C. Pradeep Kumar, Influence of near-dry ambiance on WEDM of Monel superalloy, Materials and Manufacturing Processes, 2021 Influence of near-dry ambiance on WEDM of Monel superalloy (7) : pp827-835 .
  85. P. Loganathan, A. Gnanavelbabu and K. Rajkumar, Influence of ZrB2/hBN particles on the wear behaviour of AA7075 composites fabricated through stir followed by squeeze cast technique, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2021 Influence of ZrB2/hBN particles on the wear behaviour of AA7075 composites fabricated through stir followed by squeeze cast technique (1) : pp149-160 .
  86. P. Sabarinathan, V.E. Annamalai, K. Rajkumar and K. Vishal, Effects of recovered brown alumina filler loading on mechanical, hygrothermal and thermal properties of glass fiber–reinforced epoxy polymer composite, Polymers and Polymer Composites, 2021 Effects of recovered brown alumina filler loading on mechanical, hygrothermal and thermal properties of glass fiber–reinforced epoxy polymer composite (9_suppl) : ppS1092-S1102 .
  87. R. Prakash, L. Chilambarasan and K. Rajkumar, Process Parameters Effect Investigations on Viscosity of Water-ethylene Glycol-based α-alumina Nanofluids: An Ultrasonic Experimental and Statistical Approach, Arabian Journal for Science and Engineering, 2021 Process Parameters Effect Investigations on Viscosity of Water-ethylene Glycol-based α-alumina Nanofluids: An Ultrasonic Experimental and Statistical Approach (12) : pp11909-11921 .
  88. S. Ayyanar, A. Gnanavelbabu, K. Rajkumar and P. Loganathan, Studies on High Temperature Wear and Friction Behaviour of AA6061/B4C/hBN Hybrid Composites, Metals and Materials International, 2021 Studies on High Temperature Wear and Friction Behaviour of AA6061/B4C/hBN Hybrid Composites (8) : pp3040-3057 .
  89. V. Ezhilmaran and R. Damodaram, Laser Surface Texturing on Nickel-Aluminium-Bronze Alloy for Improving the Hydrophobicity, Lasers in Manufacturing and Materials Processing, 2021 Laser Surface Texturing on Nickel-Aluminium-Bronze Alloy for Improving the Hydrophobicity (1) : pp15-27 .
  90. V. Ezhilmaran, N.J. Vasa, S. Krishnan and L. Vijayaraghavan, Femtosecond Pulsed Ti:Sapphire Laser-Assisted Surface Texturing on Piston Ring and Its Tribology Characterization, Journal of Tribology, 2021 Femtosecond Pulsed Ti:Sapphire Laser-Assisted Surface Texturing on Piston Ring and Its Tribology Characterization (4) .
  91. A. Gnanavelbabu and K. Rajkumar, Experimental Characterization of Dimensional and Surface Alternation of Straight and Angular Cutting on Self-lubricating Composite: A Wire EDM Approach, Arabian Journal for Science and Engineering, 2020 Experimental Characterization of Dimensional and Surface Alternation of Straight and Angular Cutting on Self-lubricating Composite: A Wire EDM Approach (7) : pp5859-5872 .
  92. A. Gnanavelbabu, K.T. Sunu Surendran and K. Rajkumar, Performance Evaluation of Abrasive Water Jet Machining on AA6061-B4C-HBN Hybrid Composites Using Taguchi Methodology, Lecture Notes on Multidisciplinary Industrial Engineering, 2020 Performance Evaluation of Abrasive Water Jet Machining on AA6061-B4C-HBN Hybrid Composites Using Taguchi Methodology : pp651-660 .
  93. A. Suresh Babu, M. Jaivignesh and D. Poovarasan, Mechanical and Crystallization Behaviour of Sisal Fiber and Talc Reinforced Polylactic Acid Composites, Lecture Notes on Multidisciplinary Industrial Engineering, 2020 Mechanical and Crystallization Behaviour of Sisal Fiber and Talc Reinforced Polylactic Acid Composites : pp749-756 .
  94. B. Mouliprasanth and P. Hariharan, Scaling approach towards electrochemical micromachining: a method to evaluate similarity, International Journal of Advanced Manufacturing Technology, 2020 Scaling approach towards electrochemical micromachining: a method to evaluate similarity (9-10) : pp3231-3249 .
  95. B. Mouliprasanth and P. Hariharan, Measurement of Performance and Geometrical Features in Electrochemical Micromachining of SS304 Alloy, Experimental Techniques, 2020 Measurement of Performance and Geometrical Features in Electrochemical Micromachining of SS304 Alloy (3) : pp259-273 .
  96. C. Devanathan, A. Suresh Babu, R. Giri and A. Azad, Predicting the Tensile Strength of Metal Matrix Composites Joined by Friction Stir Welding and Optimization of Parameters using Firefly Algorithm, Journal of the Chinese Society of Mechanical Engineers, Transactions of the Chinese Institute of Engineers, Series C/Chung-Kuo Chi Hsueh Kung Ch'eng Hsuebo Pao, 2020 Predicting the Tensile Strength of Metal Matrix Composites Joined by Friction Stir Welding and Optimization of Parameters using Firefly Algorithm (4) : pp513-520 .
  97. C.C. Sastry, K. Gokulakrishnan, P. Hariharan, M.P. Kumar and S.R. Boopathy, Investigation of boring on gunmetal in dry, wet and cryogenic conditions, Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2020 Investigation of boring on gunmetal in dry, wet and cryogenic conditions (1) .
  98. C.S. Shamli, P. Hariharan, N. Yuvaraj and E. Rajkeerthi, Impact of electrical process parameters in electrochemical micromachining of nimonic 75 alloy, International Journal of Vehicle Structures and Systems, 2020 Impact of electrical process parameters in electrochemical micromachining of nimonic 75 alloy (2) : pp197-200 .
  99. C.S. Shamli, P. Hariharan, N. Yuvaraj and E. Rajkeerthi, Impact of electrical process parameters in electrochemical micromachining of nimonic 75 alloy, International Journal of Vehicle Structures and Systems, 2020 Impact of electrical process parameters in electrochemical micromachining of nimonic 75 alloy (2) : pp197-200 .
  100. J. Nitesh Krishnan, J. Deepak and P. Hariharan, Multi-response optimization of electrochemical micromachining on masked SS304, Engineering Research Express, 2020 Multi-response optimization of electrochemical micromachining on masked SS304 (1) .
  101. J.M. Jafferson, P. Hariharan and J. Ramkumar, Correlation of Three-Dimensional Roughness Parameters with the Crater Dimensions in μeD-Milling of Cryogenic-Treated Tool and Workpiece, Journal of Micro and Nano-Manufacturing, 2020 Correlation of Three-Dimensional Roughness Parameters with the Crater Dimensions in μeD-Milling of Cryogenic-Treated Tool and Workpiece (1) .
  102. K. Ramraji, K. Rajkumar and P. Sabarinathan, Mechanical and free vibration properties of skin and core designed basalt woven intertwined with flax layered polymeric laminates, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2020 Mechanical and free vibration properties of skin and core designed basalt woven intertwined with flax layered polymeric laminates (22) : pp4505-4519 .
  103. K. Ramraji, K. Rajkumar, M. Rajesh and K.M. Nambiraj, Investigations on the Cutting Quality of Interleaved Flax Fiber with Fly Ash-Reinforced Hybrid Polymer Composite, Springer Proceedings in Materials, 2020 Investigations on the Cutting Quality of Interleaved Flax Fiber with Fly Ash-Reinforced Hybrid Polymer Composite : pp419-430 .
  104. K.M. Nambiraj, K. Rajkumar, M. Rajesh and A. Gnanavelbabu, Effect of Solid Lubricant in Dry Machining on Al-B4C Composite, Springer Proceedings in Materials, 2020 Effect of Solid Lubricant in Dry Machining on Al-B4C Composite : pp587-596 .
  105. M. Mudhukrishnan, P. Hariharan and K. Palanikumar, Measurement and analysis of thrust force and delamination in drilling glass fiber reinforced polypropylene composites using different drills, Measurement: Journal of the International Measurement Confederation, 2020 Measurement and analysis of thrust force and delamination in drilling glass fiber reinforced polypropylene composites using different drills .
  106. M. Rajesh, K. Rajkumar, A. Gnanavelbabu and K.M. Nambiraj, The Role of HBN Solid Lubricant Reducing Cutting Forces of Dry Machined Al-B4C Composite, Lecture Notes on Multidisciplinary Industrial Engineering, 2020 The Role of HBN Solid Lubricant Reducing Cutting Forces of Dry Machined Al-B4C Composite : pp697-705 .
  107. M. Rajesh, K. Rajkumar, K.M. Nambiraj and K. Ramraji, Evaluation of Surface Integrity of Multi-stacked Glass Interplyed with Flax Laminate by Abrasive Waterjet Machining, Springer Proceedings in Materials, 2020 Evaluation of Surface Integrity of Multi-stacked Glass Interplyed with Flax Laminate by Abrasive Waterjet Machining : pp569-577 .
  108. P. Loganathan, A. Gnanavelbabu, K. Rajkumar and S. Ayyanar, Microstructural characteristics and mechanical behaviour of AA7075/TiB2 composite, Materials Science Forum, 2020 Microstructural characteristics and mechanical behaviour of AA7075/TiB2 composite : pp40-46 .
  109. P. Sabarinathan, K. Rajkumar, V.E. Annamalai and K. Vishal, Characterization on chemical and mechanical properties of silane treated fish tail palm fibres, International Journal of Biological Macromolecules, 2020 Characterization on chemical and mechanical properties of silane treated fish tail palm fibres : pp2457-2464 .
  110. P. Sabarinathan, K. Rajkumar, V.E. Annamalai and K. Vishal, Static and dynamic behavior of micrometric agro Prunus amygdalus particulate distributed interpolymer layer-kenaf composite, Polymer Composites, 2020 Static and dynamic behavior of micrometric agro Prunus amygdalus particulate distributed interpolymer layer-kenaf composite (8) : pp3309-3321 .
  111. P. Sabarinathan, V.E. Annamalai and K. Rajkumar, Sustainable application of grinding wheel waste as abrasive for abrasive water jet machining process, Journal of Cleaner Production, 2020 Sustainable application of grinding wheel waste as abrasive for abrasive water jet machining process .
  112. S. Kunar, E. Rajkeerthi, K. Mandal and B. Bhattacharyya, Fabrication of array of micro circular impressions using different electrolytes by maskless electrochemical micromachining, Manufacturing Review, 2020 Fabrication of array of micro circular impressions using different electrolytes by maskless electrochemical micromachining .
  113. S. Ram Prakash, K. Rajkumar and G. Selvakumar, Pulse and Work Revolution Parameters of Wire Electrical Discharge Turning on Ti-6Al-4V Alloy, Lecture Notes on Multidisciplinary Industrial Engineering, 2020 Pulse and Work Revolution Parameters of Wire Electrical Discharge Turning on Ti-6Al-4V Alloy : pp611-620 .
  114. T. Dinesh, A. Kadirvel and P. Hariharan, Thermo-Mechanical and Wear Behaviour of Surface-Treated Pineapple Woven Fibre and Nano-Silica Dispersed Mahua Oil Toughened Epoxy Composite, Silicon, 2020 Thermo-Mechanical and Wear Behaviour of Surface-Treated Pineapple Woven Fibre and Nano-Silica Dispersed Mahua Oil Toughened Epoxy Composite (12) : pp2911-2920 .